1304 Low Vibration and Noise Hybrid Ceramic Roller Bearing, Self Aligning Roller Bearing for Chemical Equipment
Hybrid Ceramic Bearing Detail:
The hybrid ceramic roller bearings have stainless steel rings and ceramic rollerss. The rings are made from AISI440C, 304 or 316 stainless steel. The ceramic rollers are made from ZrO2, Si3N4 or Sic. We can also offer our hybrid ceramic bearings with PEEK or 316 stainless steel cages.
The hybrid ceramic bearing rollerss has the advantage as below:
Ceramic self-aligning bearings have a relatively high radial load capacity and are generally suitable for those with heavy loads and impact loads. When the shaft and outer casing are deflected, it can be automatically adjusted without increasing the bearing load. At the same time compensate for different degrees of error.
The raceway of the ceramic self-aligning bearing is spherical, and its center of curvature is consistent with the center of the bearing. So the inner race, the ball, and the cage can rotate in the center of the bearing. Because of its small contact angle, the corresponding axial load capacity is also relatively small. The shaft and housing center are more suitable.
Ceramic Bearing Dimension:
| Bearing Model | Bore Diameter (d) | Outer Diameter (D) | Width (B) |
| 1304HC | 20 mm | 52 mm | 15 mm |
Ceramic Roller Bearings Feature:
- High Temperature Resistance
- Low Temperature Resistance
- Harsh Environment Conquered
- Low Vibration and Noise
- Wear Resistance
- Corrosion Resistance
- Grease-free, Self-lubrication
ABEC 3 Self Aligning Bearing Application:
- Semiconductor/FPD/High-performance Film
- Food Equipment
- Medical Equipment
- Vacuum Equipment
- Chemical Equipment
- Renewable Energy
- Pharmaceutical Equipments
- Automotive
- Fishing Reel
- Bicycle Wheel, Skateboard, Motor Wheel
Product Tags:
|
|
Low Vibration And Noise 1304 Self Aligning Roller Bearing For Chemical Equipmen Images
|
